Components: Panels | Posts | Windows | Gates/Doors
Posts are configured for a standard 3 1/4" sweep-space, and project 2" above the panels. Flush to the floor partitions can be made by modifying the post's standard hole layout.
Part No. | Type | Height | Weight |
RP-8 | Run Post | 8'-5 1/4" | 20 |
CP-8 | Corner Post | 8'-5 1/4" | 21 |
TP-8 | Tee Post | 8'-5 1/4" | 21 |
RP-10 | Run Post | 10'-5 1/4" | 23 |
CP-10 | Corner Post | 10'-5 1/4" | 24 |
TP-10 | Tee Post | 10'-5 1/4" | 24 |
RP-12 | Run Post | 12'-5 1/4" | 33 |
CP-12 | Corner Post | 12'-5 1/4" | 33 |
TP-12 | Tee Post | 12'-5 1/4" | 33 |
Wire Partition Posts are made of 2" x 2" x 14 gauge (.083) steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for floor anchoring, are welded to each. A decorative cap is tack welded to the top.
Posts are drilled with 1/2" holes to accept hardware for mounting panels and doors. Hole spacing is set to leave a 3 1/4" sweep space below the panels. Posts have a 2" projection above the panels.