- Color: Gray
- No. of Walls: 4
- Height: 8'
- Length: 8'
- Width: 8'
- Top: Open Top
- Wall Construction: 10 gauge crimped steel wire
- Wire Mesh Openings: 2" x 1"
- # of Walls: 4
- Frame: 1-1/4" x 1-1/4" x 1/8" angle steel
- Stiffeners: (2) 1/4" x 3/4" flat steel ran vertically
- Mounting Hardware: 3/8" x 3" plated nuts & bolts; 3/8" wedge anchors - included
- Base Plates: 2" x 7" x 1/4" flat steel welded to the bottom of posts
- Door Stiffeners: (2) horizontal stiffeners, (2) diagonal stiffeners from latch to corners - All made from 1/4" x 3/4" flat steel
- Lock: Padlock Lugs
- Hinges: (3) 4" x 4" spun pin hinges
- Pick Plate: Included
- Slam Bar: Included
- Posts: 2" x 2", 14 gauge steel tubing
- Door Construction: 10 gauge crimped steel wire
- Finish: Gray acrylic enamel
- Touch Up Paint: Included
- Weight: 748.0 lbs. ea.
Click on the thumbnails to see a larger image below.
Prisoner Holding Cell
Prisoner Holding Cell
Prisoner Holding Cell
3023
Loading...

Rugged woven wire construction, customizability, and easy installation make these cells popular with law enforcement, corrections, and military communities. Excellent holding areas for venues such as airports, race tracks, stadiums, and fairgrounds.
Easy to reconfigure, remove, add on for changing needs and layouts.
- Partitions are assembled with durable 3/8" hardware.
- Hardware is not accessible from the interior.
- Double-tough construction provides unequaled strength and security.
- Installation is fast because the design uses fewer total parts.
- Panels install horizontally between 14-gauge tubular posts. They are
steel wire woven into 2" x 1" rectangular mesh and securely welded to a 1¼"
x 1¼" x 3/16" steel angle frame.
- Listed dimensions reflect exterior size; enclosed dimensions are slightly smaller.
- Standard footplates are 2" x 7". They extend outside the post by 2½" per corner post position depending on footplate orientation. They will slightly increase overall dimensions.
- If you are in a seismic zone, or your floor is not smooth or even, a larger footplate may be required.
- If overall dimensions are extremely critical to your project, contact us for assistance. We can calculate the precise size of your enclosure in advance.
- Finish: Gray acrylic enamel. Available with gray powder coat finish upon request at no extra cost (may extend lead time). Other colors are also available in powder coat for an additional fee; contact us for more information.
Gate: 3' wide single-hinged gate is 7'-3¾" tall with a transom panel on top sized to match overall partition height. Includes three 4" x 4" 10-gauge tight pin hinges, key lock, door posts, and all hardware. It is constructed to work on the left or right hand side, and to swing inside or outside of the partition.
4-sided structure:
Four-wall wire enclosure unit is freestanding and can be utilized anywhere in a
facility to provide a secure enclosure. You can place them virtually anywhere
that has a suitable floor and space. Cages have a 3-1/4" sweep space between the panel bottom and the floor. If you need assistance, please contact us.
Ceiling: Ceiling prevents entry from the top of the cage. IMPORTANT: The enclosure roof is
not load bearing. Wall and Ceiling panels are identical &
interchangeable, simplifying relocation and layout changes.
California Proposition 65
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information – www.p65warnings.ca.gov.
We're here to help you
SecureLockup.com provides speedy service and expert assistance on all material handling products. If you need help of any kind, please contact us.
- Call Toll Free: 1-877-313-1635, 7AM-7PM Central Time
- Customer Service: Inquiry forms for fast response
Product Tools
About SecureLockup.com
Literature