Your shopping cart is currently empty.
3-Wall Prisoner Holding Cell - w/Ceiling, 8' x 8' x 8', 3' Hinged Door
Secure, economical holding cell for jails & public venues can be configured to fit virtually any space
SKU: HC-888-AO-R
Manufacturer: WireCrafters
3-wall holding cell installs against any straight wall, using three wire panel walls and one building wall to enclose an area. Installs quickly and easily with standard hand tools with heavy 3/8" assembly hardware. Secure but open wire mesh construction allows circulation of lighting, HVAC, and fire suppression systems. Cell is finished smoothly, without burrs or sharp edges and painted gray - other colors are available. Heavy duty options available for facilities requiring additional security. Door includes an internal keyed lock accessible from only the outside. Contact us for assistance or pricing on additional customized options.
Dimensions note: the dimensions shown are nominal; contact us for a drawing showing the exact measurements.
Lead Time: 3 - 4 weeks + transit time
- Color: Gray
- No. of Walls: 3
- Height: 8'
- Length: 8'
- Width: 8'
- Top: Ceiling
- Wall/Ceiling Construction: 10 gauge crimped steel wire
- Wire Mesh Openings: 2" x 1"
- # of Walls: 3
- Frame: 1-1/4" x 1-1/4" x 1/8" angle steel
- Stiffeners: (2) 1/4" x 3/4" flat steel ran vertically
- Mounting Hardware: 3/8" x 3" plated nuts & bolts; 3/8" wedge anchors - included
- Base Plates: 2" x 7" x 1/4" flat steel welded to the bottom of posts
- Door Stiffeners: (2) horizontal stiffeners, (2) diagonal stiffeners from latch to corners - All made from 1/4" x 3/4" flat steel
- Lock: Padlock Lugs
- Hinges: (3) 4" x 4" spun pin hinges
- Pick Plate: Included
- Slam Bar: Included
- Posts: 2" x 2", 14 gauge steel tubing
- Door Construction: 10 gauge crimped steel wire
- Finish: Gray acrylic enamel
- Touch Up Paint: Included
- Weight: 734.0 lbs. ea.
Combine Your Purchase With
Click on the thumbnails to see a larger image below.
 |  |  |
Prisoner Holding Cell
Rugged woven wire construction, customizability, and easy installation make these cells in popular with law enforcement, corrections, and military communities. Excellent holding areas for venues such as airports, race tracks, stadiums, and fairgrounds.
Easy to reconfigure, remove, and reinstall for changing facility layouts.
- Partitions are assembled with durable 3/8" hardware.
- Hardware is not accessible from the interior.
- Double-tough construction provides unequaled strength and security.
- Installation is fast because the design uses fewer total parts.
- Panels install horizontally between 14-gauge tubular posts. They are steel wire woven into 2" x 1" rectangular mesh and securely welded to a 1¼" x 1¼" x 3/16" steel angle frame.
- Listed dimensions reflect exterior size; enclosed dimensions are slightly smaller.
- Standard footplates are 2" x 7". They extend outside the post by 2½" per corner post position depending on footplate orientation. They will slightly increase overall dimensions.
- If you are in a seismic zone, or your floor is not smooth or even, a larger footplate may be required.
- If overall dimensions are extremely critical to your project, contact us for assistance. We can calculate the precise size of your enclosure in advance.
- Finish: Gray acrylic enamel. Available with gray powder coat finish upon request at no extra cost (may extend lead time). Other colors are also available in powder coat for an additional fee; contact us for more information.
Gate: 3' wide single-hinged gate is 7'-3¾" tall with a transom panel on top sized to match overall partition height. Includes three 4" x 4" 10-gauge tight pin hinges, key lock, door posts, and all hardware. It is constructed to work on the left or right hand side, and to swing inside or outside of the partition. 
Three-Sided Structure:
Three-wall wire enclosure unit is designed to install against an existing wall,
using three wire panel walls and one building wall to enclose an area. Cages
have a 3-1/4" sweep space between the panel bottom and the floor. The end walls must be attached to an existing wall, and are not freestanding (wall anchoring not included).Important note: Your facility wall must be able to accommodate wall or ceiling panels to utilize this model. At-wall post connections may be required in some circumstances. Posts at the wall are recommended for dry wall, gypsum, or metal walls. Panels may connect directly to masonry, block, and some wood walls. Adding posts at the wall will increase the price and weight of your unit. If you need assistance to determine the suitability of your wall for at-wall panel connections, contact us.
Ceiling: Ceiling prevents entry or exit from the top of the cage. IMPORTANT: The enclosure roof is not load bearing. Wall and Ceiling panels are identical & interchangeable, simplifying relocation and layout changes.
California Proposition 65
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information – www.p65warnings.ca.gov.
We're here to help you
SecureLockup.com provides speedy service and expert assistance on all material handling products. If you need help of any kind, please contact us.- Call Toll Free: 1-877-313-1635, 7AM-7PM Central Time
- Customer Service: Inquiry forms for fast response
Product Tools
- View Cart
- View Quote Builder - request a quote for any catalog product
About SecureLockup.com
Literature
