SKU: 66166
Manufacturer: WireCrafters
Three-wall wire enclosure installs against any existing straight wall, using three wire panel walls and one building wall to enclose an area. This creates a space-efficient cage that you can either anchor to the wall (if the material is appropriate) or to posts. Partitions are built with high-strength 2" x 1" woven steel wire mesh welded to a 1-1/4" x 1-1/4" angle frame for complete security. You can create a continuous row of connected cages along any wall with this design. If you are attaching the partition to the wall and not to a shared post of another partition, you must order an additional post for each panel that will be attached to the wall. These can be found in the accessories section below. Doors include cylinder key locks, other lock options are available.
Some assembly required on locking components and some accessories. Universal construction allows for left or right configuration of the door, with inside or outside swing.
Panels are constructed of 10 gauge (.135) steel wire, woven into 2" x 1" rectangular mesh and securely welded to a 1 1/4" x 1 1/4" x 1/8" steel angle frame. Frames have 7/8" x 7/16" slotted holes for mounting to posts and adjacent panels. Panels four to seven feet wide have one 1/4" x 3/4" stiffener welded to the frame. Wider panels have two stiffeners.
Posts are made of 2" x 2" x 14 gauge (.083) steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for floor anchoring, are welded to each. A decorative cap is tack welded to the top. Posts are drilled with 1/2" holes to accept hardware for mounting panels and doors. Hole spacing is set to leave a 3 1/4" sweep space below the panels. Posts have a 2" projection above the panels.
Doors are constructed of 10 gauge (.135) steel wire, woven into 2" x 1" rectangular mesh and securely welded to a 1 1/4" x 1 1/4" x 3/16" steel angle frame. Stiffeners, two horizontal and one vertical, of 1/4" x 3/4" steel flat are securely welded to the frame behind the mesh.
All erection hardware is supplied. Panel mounting hardware is 3/8" standard thread grade two plated fasteners. Floor anchors are 3/8" wedge type.
Nonplated parts receive one coat of gray acrylic enamel. Touch up paint is included with each order. Other colors are available.
Download Architectural Specifications:
A wire mesh security cage prevents pilferage, encloses work areas, and creates customized, accessible security areas in warehouses, manufacturing facilities, and distribution centers. It gives you control of who has access to valuable stock.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information – www.p65warnings.ca.gov.
Lead Time: 1-2 weeks + transit time
Contact Cisco-Eagle to get a Shipping Rate for this item